Description
Part : FIM-7920E
Condition : New
Brand : Fortinet
For QUANTITY DISCOUNTS – Call us at 833-375-8324
Fortinet Interface Module FIM-7920E – Expansion module – 100 Gigabit QSFP28 x 4
The FIM-7920E interface module is a hot swappable module that provides data, management and session sync/heartbeat interfaces, base backplane switching and fabric backplane session-aware load balancing for a FortiGate-7000 series chassis. The FIM-7920E includes an integrated switch fabric and DP2 processors to load balance millions of data sessions over the chassis fabric backplane to FPM processor modules.
KEY SELLING POINTS
- Four 10/100/1000BASE-T out of band management Ethernet interfaces (MGMT1 to MGMT4)
- One 80Gbps fabric backplane channel for traffic distribution with each FPM installed in the same chassis as the FIM-7920E
- One 1Gbps base backplane channel for base backplane with each FPM installed in the same chassis as the FIM-7920E
- One 40Gbps fabric backplane channel for fabric backplane communication with the other FIM-7920E in the chassis
- One 1Gbps base backplane channel for base backplane communication with the other FIM-7920E in the chassis
- On-board DP2 processors and an integrated switch fabric to provide high-capacity session-aware load balancing
- One front panel USB port
- NMI switch (for troubleshooting as recommended by Fortinet Support)
- Mounting hardware
- LED status indicators
MAIN SPECIFICATIONS | |
| Product Description | Fortinet Interface Module FIM-7920E – expansion module |
| Device Type | Expansion module |
| Form Factor | Plug-in module |
| Ports | 100 Gigabit QSFP28 x 4 |
| Dimensions (WxDxH) | 11.3 in x 13.8 in x 1.2 in |
| Weight | 7.12 lbs |
| Data Link Protocol | 10 GigE, 100 Gigabit Ethernet |
| Data Transfer Rate | 100 Gbps |
EXTENDED SPECIFICATIONS | |
| General | |
| Device Type | Expansion module |
| Form Factor | Plug-in module |
| Networking | |
| Ports | 100 Gigabit QSFP28 x 4 |
| Connectivity Technology | Wired |
| Data Link Protocol | 10 Gigabit Ethernet, 100 Gigabit Ethernet |
| Data Transfer Rate | 100 Gbps |
| Status Indicators | Power, status, alarm, HA |
| Features | Hot swap module replacement |
| Expansion / Connectivity | |
| Interfaces | 4 x 100Gb Ethernet – QSFP28 ? 2 x 10Gb Ethernet – SFP+ ? 4 x 1000Base-T (management) – RJ-45 ? 1 x USB 3.0 – 9 pin USB Type A |
| Dimensions & Weight | |
| Width | 11.3 in |
| Depth | 13.8 in |
| Height | 1.2 in |
| Weight | 7.12 lbs |
?
Reviews
There are no reviews yet.